Do your own Dynacycle Oil Road Testing

Experience the Difference!

                   Road Test Instructions

                                      **Temperature Dip Stick Required**

1.    Each test should be conducted at the same outside temperature and humidity level.
2.    Set up the test bike with your 20W-50 4-stroke oil brand of choice.
3.    Fill Gas Tank. Use the same gas station and same octane for both tests.
4.    Map out route to be used during Test #1. Follow same route for Test #2 (60 miles min).
5.    During test ride, check engine temperature every 15 to 20 miles. Write down the results.
6.    At the end of Test #1, determine gas mileage used.
7.    Drain your 20W-50 oil brand and change the oil filter.
8.    Refill with Dynacycle Oil and the same brand oil filter used in Test #1.
9.    Repeat step 3.
10.  Follow the exact route used in Test #1.
11. Repeat step 5 and 6.
12. Compare difference in the results.


                         Please Fax or Email us the following results.
                                    We will contact you upon receipt.
                                                Fax: (732) 605-9004
                                        Email: info@dynacycleoil.com

Date of Test:

Testers Name:

Testers Shop Name:

Testers Address:

Testers Telephone #:

Testers Email:

Testers Website URL:

Motorcycle Make:

Motorcycle Model:

Motorcycle Year:

Measurement

Test #1

Test #2

Brand Name

Dynacycle Oil

Outside Temperature

Humidity

Engine Temperature

Gas Mileage